Power sources (Orbital welding)
PS 164
Ideal for use on site or in workshop
Full function power source with useful welding features and convenient data acquisition for quality assurance. Portable, with full function remote control. Single phase input power source.
Process TIG/GTAW for Polysoude fusion weld heads and weld heads using cold wire
More »» |
 |
PS 254-2
Ideal for use in workshop
Power source with integral coolant re-circulator. High precision inverter power source for perfectly controlled heat input and weld penetration.
TIG/GTAW for all Polysoude fusion weld heads and weld heads using cold wire
More »» |
 |
Closed chamber weld heads
UHP 250-2 / 500-2 / 1500-2
Ultra high purity heads for joining tubes, micro-fittings, fittings and accessories
Perfectly adapted for joining tubes, fittings and accessories out of stainless steel, high alloy materials and titanium. The head clamps on both sides of the weld joint and forms a closed chamber for the shielding gas and the welding arc. During welding, the head body remains stationary, the electrode gear and tungsten electrode rotate around the tube. Fixture blocks for micro-fittings and fittings without tack welding. Narrow weld head profile.
TIG / GTAW welding of tube to tube joints (O.D. from 1,6 mm/1/16” to 33,7 mm/1 1/3”)
More »» |
 |
MW 40 / 65 / 115 / 170
For high productivity applications
Perfectly adapted for joining tubes, fittings and accessories out of stainless steel, high alloy materials and titanium. The head clamps on both sides of the weld joint and forms a closed chamber for the shielding gas and the welding arc. During welding, the head body remains stationary, the electrode gear and tungsten electrode rotate around the tube.
TIG / GTAW welding of tube to tube joints (O.D. from 6 mm/0,25” to 170 mm/6,35”)
More »» |
 |
K SERIES
For applications demanding the highest possible gas protection
Perfectly adapted for joining tubes, fittings and accessories out of stainless steel, high alloy materials and titanium. The head clamps on both sides 2T (or only on one side 1T) of the weld joint and forms with its ceramic gas cup a closed chamber for the shielding gas and the welding arc. During welding, the head body remains stationary, the electrode gear and tungsten electrode rotate around the tube.
TIG / GTAW welding of tube to tube joints (O.D. from 3 mm/1/8” to 177,8 mm/7”)
More »» |
 |
Open weld heads
MU IV
For standard or special applications
Perfectly adapted for joining small and medium wall tubes and pipes out of all weldable materials. The head clamps on one side of the weld joint. During welding, the head body remains stationary, the torch rotates around the tube.
TIG / GTAW cold wire welding of tube to tube joints (O.D. from 8 mm/0,3” to 275 mm/11”)
More »» |
 |
Wire feeders
POLYFIL-2
Floor mounted wire feeder
Wire feeder for welding with filler wire.
TIG / GTAW, Plasma, cold wire feeder
More »» |
 |
Real time data aquisition system
REAL TIME DATA ACQUISITION SYSTEM
The memory of automatic welding and reproductive process
Automatic welding over and above being a perfectly reproducible process, enables recording and archiving all actual welding parameters and guarantees traceability for quality assurance.
More »» |
 |
|
Markets - Semiconductor industry
