|
An increase of more than 30% in your productivity rate
- As orbital welding is much less labour intensive than manual welding, a welding operator makes 30% more welds per day on average when using orbital welding equipment.
- Welding operators can weld simultaneously with several welding heads (2 to 3 heads depending on the application).
- Reject and repair rates are less than 1%.
- Due to the repetitive aspect of the process, weld defects are less likely to occur.
|
 |
|
Extremely simple to use
- The operating process for the equipment is mastered in less than one day’s training.
- A self-programming system and standard program library are included with the power source, making it easy to adapt programs to each type of application.
|
 |
|
Manufacturing methods easily adapted to the work load
- The equipment is extremely simple to use. This means that welding teams could quickly be expanded in the case of increased demand.
- If you do not have enough equipment to absorb your peak work loads, simply call our rental department.
|
 |
The only way to do internal bore welds, on double plates or at the back side of the Tube-sheet
Our equipment makes it possible to weld in confined spaces, thus optimizing layout designs.
|
 |
|
A high level of quality that will make you stand out from your competitors
TIG orbital welding allows you to keep ahead of competitors who still use manual welding techniques.
 TS 25 - tube to tube sheet weld head
TS 2000 - tube to tube sheet weld head
|
 |
Markets - Thermal transfer equipment – heat exchangers
