Power sources (Orbital welding)
PS 254-2
Ideal for use in workshop
Power source with integral coolant re-circulator. High precision inverter power source for perfectly controlled heat input and weld penetration.
TIG/GTAW for all Polysoude fusion weld heads and weld heads using cold wire
More »»  |
 |
PS 406
Ideal for use in workshop
Power source with integral coolant re-circulator. High precision inverter power source for perfectly controlled heat input and weld penetration. Built-in AVC and torch oscillation control. Control of peripherals (positioners, welding manipulators).
TIG/GTAW for all Polysoude weld heads and welding manipulators
More »» |
 |
PC 300 TR
Precise and rapid adjustments
Precision output transistorized power source.
State-of-the-art design with multiple pulse wave from output.
Specifically engineered to weld a wide range of materials.
TIG/GTAW for all Polysoude weld heads and welding manipulators
More »» |
 |
PC 350 DC
Solves the majority of welding applications
Evolutive power source with integrated weld controller.
DC output inverter based power source.
TIG/GTAW for all Polysoude weld heads and welding manipulators
More »» |
|
PC 375 AC/DC
Ideal for aluminium
AC/DC output inverter based power source with square wave, variable polarity output and independant weld controler.
TIG/GTAW for all Polysoude weld heads and welding manipulators
More »» |
|
PC MIG-MAG
For highest deposition rates
Control unit built in a protected container with interface for standard synergic MIG-MAG/GMAW power sources.
MIG-MAG/GMAW/FCAW for Polysoude weld heads and welding manipulators
More »» |
 |
Open weld heads
MU IV
For standard or special applications
Perfectly adapted for joining small and medium wall tubes and pipes out of all weldable materials. The head clamps on one side of the weld joint. During welding, the head body remains stationary, the torch rotates around the tube.
TIG / GTAW cold wire welding of tube to tube joints (O.D. from 8 mm/0,3” to 275 mm/11”)
More »» |
 |
MU IV AVC/OSC
For standard or special applications
Full function weld head with AVC and torch oscillation. Perfectly adapted for joining medium and heavy wall tubes and pipes out of all weldable materials. The head clamps on one side of the weld joint. During welding, the head body remains stationary, the torch rotates around the tube.
TIG / GTAW cold wire welding of tube to tube joints (O.D. from 8 mm/0,3” to 275 mm/11”)
More »» |
 |
Tube to tube sheet weld heads
TS 25
For highly oxidisable materials
With its purge gas chamber, the head is particularly designed for the welding of titanium, inconel and all oxidation sensible materials. The weld head is centred and clamped in the tube to be welded by means of an expansion mandrel. During welding, the head body remains stationary, the welding torch rotates around the tube.
TIG / GTAW welding of tubes to tube sheet joints (I.D. from 10 mm/0,4" to O.D. 25 mm/1")
More »» |
 |
TS 34
For highly oxidisable materials
With its purge gas chamber, the head is particularly designed for the welding of titanium, inconel and all oxidation sensible materials. The weld head is centred and clamped in the tube to be welded by means of an expansion mandrel. During welding, the head body remains stationary, the welding torch rotates around the tube.
TIG / GTAW welding of tubes to tube sheet joints (I.D. from 9,5 mm/0,4" to O.D. 33,7 mm/1 1/3")
More »» |
 |
TS 2000
Particularly designed for high duty cycle applications
Open head, designed for flush, protuding and recessed tubes. The weld head is introduced and centred in the tube to be welded by means of a centring mandrel. During welding, the head body remains stationary, the welding torch rotates around the tube.
TIG / GTAW cold wire welding of tubes to tube sheet joints (I.D. from 10 mm/0,50" to O.D. 60 mm/2,40")
More »» |
 |
Wire feeders
POLYFIL-2
Floor mounted wire feeder
Wire feeder for welding with filler wire.
TIG / GTAW, Plasma, cold wire feeder
More »» |
 |
Special Equipment (Orbital welding)
Special equipment (orbital welding)
Fixed work piece, the welding torch follows a circular welding seam. For specific applications not covered by our modular standard weld heads, we have developed and we are continually upgrading a range of generic tools adaptable for your particular needs.
More »» |
 |
|
Applications - Tube-header / Collector
