Power sources (Orbital welding)
PS 254-2
Ideal for use in workshop
Power source with integral coolant re-circulator. High precision inverter power source for perfectly controlled heat input and weld penetration.
TIG/GTAW for all Polysoude fusion weld heads and weld heads using cold wire
More »»  |
 |
PS 406
Ideal for use in workshop
Power source with integral coolant re-circulator. High precision inverter power source for perfectly controlled heat input and weld penetration. Built-in AVC and torch oscillation control. Control of peripherals (positioners, welding manipulators).
TIG/GTAW for all Polysoude weld heads and welding manipulators
More »» |
 |
PC 300 TR
Precise and rapid adjustments
Precision output transistorized power source.
State-of-the-art design with multiple pulse wave from output.
Specifically engineered to weld a wide range of materials.
TIG/GTAW for all Polysoude weld heads and welding manipulators
More »» |
 |
PC 350 DC
Solves the majority of welding applications
Evolutive power source with integrated weld controller.
DC output inverter based power source.
TIG/GTAW for all Polysoude weld heads and welding manipulators
More »» |
|
Closed chamber weld heads
MW 40 / 65 / 115 / 170
For high productivity applications
Perfectly adapted for joining tubes, fittings and accessories out of stainless steel, high alloy materials and titanium. The head clamps on both sides of the weld joint and forms a closed chamber for the shielding gas and the welding arc. During welding, the head body remains stationary, the electrode gear and tungsten electrode rotate around the tube.
TIG / GTAW welding of tube to tube joints (O.D. from 6 mm/0,25” to 170 mm/6,35”)
More »» |
 |
Open weld heads
MU IV
For standard or special applications
Perfectly adapted for joining small and medium wall tubes and pipes out of all weldable materials. The head clamps on one side of the weld joint. During welding, the head body remains stationary, the torch rotates around the tube.
TIG / GTAW cold wire welding of tube to tube joints (O.D. from 8 mm/0,3” to 275 mm/11”)
More »» |
 |
MU IV AVC/OSC
For standard or special applications
Full function weld head with AVC and torch oscillation. Perfectly adapted for joining medium and heavy wall tubes and pipes out of all weldable materials. The head clamps on one side of the weld joint. During welding, the head body remains stationary, the torch rotates around the tube.
TIG / GTAW cold wire welding of tube to tube joints (O.D. from 8 mm/0,3” to 275 mm/11”)
More »» |
 |
Wire feeders
POLYFIL-2
Floor mounted wire feeder
Wire feeder for welding with filler wire.
TIG / GTAW, Plasma, cold wire feeder
More »» |
 |
Special Equipment (Orbital welding)
Special equipment (orbital welding)
Fixed work piece, the welding torch follows a circular welding seam. For specific applications not covered by our modular standard weld heads, we have developed and we are continually upgrading a range of generic tools adaptable for your particular needs.
More »» |
 |
|
Applications - Tube-return bend
