Power sources (Orbital welding)
PS 164
Ideal for use on site or in workshop
Full function power source with useful welding features and convenient data acquisition for quality assurance. Portable, with full function remote control. Single phase input power source.
Process TIG/GTAW for Polysoude fusion weld heads and weld heads using cold wire
More »» |
 |
PS 254-2
Ideal for use in workshop
Power source with integral coolant re-circulator. High precision inverter power source for perfectly controlled heat input and weld penetration.
TIG/GTAW for all Polysoude fusion weld heads and weld heads using cold wire
More »» |
 |
PS 406
Ideal for use in workshop
Power source with integral coolant re-circulator. High precision inverter power source for perfectly controlled heat input and weld penetration. Built-in AVC and torch oscillation control. Control of peripherals (positioners, welding manipulators).
TIG/GTAW for all Polysoude weld heads and welding manipulators
More »» |
 |
PC 300 TR
Precise and rapid adjustments
Precision output transistorized power source.
State-of-the-art design with multiple pulse wave from output.
Specifically engineered to weld a wide range of materials.
TIG/GTAW for all Polysoude weld heads and welding manipulators
More »» |
 |
PC 350 DC
Solves the majority of welding applications
Evolutive power source with integrated weld controller.
DC output inverter based power source.
TIG/GTAW for all Polysoude weld heads and welding manipulators
More »» |
|
PC 375 AC/DC
Ideal for aluminium
AC/DC output inverter based power source with square wave, variable polarity output and independant weld controler.
TIG/GTAW for all Polysoude weld heads and welding manipulators
More »» |
|
Closed chamber weld heads
UHP 250-2 / 500-2 / 1500-2
Ultra high purity heads for joining tubes, micro-fittings, fittings and accessories
Perfectly adapted for joining tubes, fittings and accessories out of stainless steel, high alloy materials and titanium. The head clamps on both sides of the weld joint and forms a closed chamber for the shielding gas and the welding arc. During welding, the head body remains stationary, the electrode gear and tungsten electrode rotate around the tube. Fixture blocks for micro-fittings and fittings without tack welding. Narrow weld head profile.
TIG / GTAW welding of tube to tube joints (O.D. from 1,6 mm/1/16” to 33,7 mm/1 1/3”)
More »» |
 |
MW 40 / 65 / 115 / 170
For high productivity applications
Perfectly adapted for joining tubes, fittings and accessories out of stainless steel, high alloy materials and titanium. The head clamps on both sides of the weld joint and forms a closed chamber for the shielding gas and the welding arc. During welding, the head body remains stationary, the electrode gear and tungsten electrode rotate around the tube.
TIG / GTAW welding of tube to tube joints (O.D. from 6 mm/0,25” to 170 mm/6,35”)
More »» |
 |
K SERIES
For applications demanding the highest possible gas protection
Perfectly adapted for joining tubes, fittings and accessories out of stainless steel, high alloy materials and titanium. The head clamps on both sides 2T (or only on one side 1T) of the weld joint and forms with its ceramic gas cup a closed chamber for the shielding gas and the welding arc. During welding, the head body remains stationary, the electrode gear and tungsten electrode rotate around the tube.
TIG / GTAW welding of tube to tube joints (O.D. from 3 mm/1/8” to 177,8 mm/7”)
More »» |
 |
Open weld heads
MU IV
For standard or special applications
Perfectly adapted for joining small and medium wall tubes and pipes out of all weldable materials. The head clamps on one side of the weld joint. During welding, the head body remains stationary, the torch rotates around the tube.
TIG / GTAW cold wire welding of tube to tube joints (O.D. from 8 mm/0,3” to 275 mm/11”)
More »» |
 |
MU IV AVC/OSC
For standard or special applications
Full function weld head with AVC and torch oscillation. Perfectly adapted for joining medium and heavy wall tubes and pipes out of all weldable materials. The head clamps on one side of the weld joint. During welding, the head body remains stationary, the torch rotates around the tube.
TIG / GTAW cold wire welding of tube to tube joints (O.D. from 8 mm/0,3” to 275 mm/11”)
More »» |
 |
Wire feeders
POLYFIL-2
Floor mounted wire feeder
Wire feeder for welding with filler wire.
TIG / GTAW, Plasma, cold wire feeder
More »» |
 |
Special Equipment (Orbital welding)
Special equipment (orbital welding)
Fixed work piece, the welding torch follows a circular welding seam. For specific applications not covered by our modular standard weld heads, we have developed and we are continually upgrading a range of generic tools adaptable for your particular needs.
More »» |
 |
Special Equipment (Mechanised welding)
Peripherals welding manipulators
Positioner-rotator
Positioners and rotators for projects that require automatic welding processes. The equipment is interfaced with our NC-weld control and therefore becomes part of the integrated system including all possibilities of synchronisation.
More »» |
 |
Column & boom
A column & boom equipment is used to maximize TIG/GTAW, Plasma and MIG-MAG/GMAW welding for stainless steel, mild and alloy steels. The process perfectly suits longitudinal and vertical welding requirements. It can also be associated with a positioner-rotator for circular welding. The equipment is interfaced with our NC-weld control and therefore becomes part of the integrated system including all possibilities of synchronisation.
More »» |
 |
Welding lathe
Our welding lathe systems solve numerous applications for circular workpieces. Thanks to their modular concept, the diameter, the length and the weight of the workpiece are the main criteria to choose the right welding configuration. The equipment is interfaced with our NC-weld control and therefore becomes part of the integrated system including all possibilities of synchronisation.
More »»
Modular welding lathe
Fixed station |
 |
| |
Applications - Tube-tube - bend - fitting - accessories
